Nikon DS-2MBWC 用户手册

.

MICROSCOPE

.

   

VI Basic Operations 

 

6  Using the Microscope Control 

- 150 - 

 

 

 

 

 

Compatible only with microscopes incorporating the DIH. 

 

1）  If the camera head is connected to the rear port of the DIH, the menu indicates the 

magnification in the optical zoom column 

  for the current optical zoom incorporated in 

the rear port of the DIH. 

NOTE: 
* 

Use microscope control menu 1 to change the magnification of the optical 
zoom. 

* If 

the 

  checkbox on microscope control menu 1 is checked, 

zoom magnifications will not be displayed. If the camera head is connected 
to the rear port of the DIH, make sure the checkbox is unchecked. 

 

 

 

 

Compatible only with microscopes incorporating the DIH. 

 

1）  The menu indicates the name of the current filter in the filter column 

. 

NOTE: 
* 

Before using this function, you must set up filter information from a PC with 
the setup software. For more information, refer to the instruction manual 
for your microscope. 

* 

Use microscope control menu 1 to change filters. 

 

 

 

 
 
 
 

 

 

 

If the microscope connected is a Nikon 90i microscope incorporating the DIH-E, you can use one 
of the Nikon-specified default observation methods. 

 

1）  Select the icon representing your desired observation method to change microscope 

settings for this observation method. 

2）  The icon representing the current observation method will be marked with a red border. 

NOTE: 
* 

The default observation method on startup is "BF." 

* 

Right-click on any icon representing an observation method to display the 
names of all observation methods. You also can select the desired 
observation method from within this display to change observation 
methods.