Canon DC40 用户手册

下载
页码 144
57
Advance
d
 Feat
u
res
Mor
e
 Re
co
rding
 O
p
tions
E
Using the Flash
You can use the built-in flash for recording still images in dark places. The flash is 
equipped with the red-eye reduction function.
1. Set the camcorder to record still images (
) and select a 
recording program other than 
 Fireworks (SCN).
2. Press the   (flash) button.
• Repeatedly pressing the   button will cycle between the flash modes.
• The symbol “
” disappears after 4 seconds.
3. Press the PHOTO button, first halfway to activate the autofocus and 
then fully to record the still image.

The practical range of the flash is approx. 1 to 2 m (3.3 to 6.6 ft.). The range 
depends upon the recording conditions.

The range of the flash decreases in continuous shooting mode.

For the red-eye reduction to be effective, the subject needs to look at the assist 
lamp. The degree of reduction depends on the distance and on each individual.

The red-eye reduction mode cannot be used in Stitch Assist mode.

The flash will not fire in the following cases:
- When you manually adjust the exposure in   (auto) or 
 (red-eye 
reduction) mode.
- During auto exposure bracketing.

The flash mode cannot be selected when the exposure is locked, or after the 
first still image in Stitch Assist mode.

We recommend not using the flash when the optional Wide-converter or Tele-
converter is attached. Their shadows appear on the screen.
 (auto)
The flash fires automatically according to the brightness 
of the subject.
 (red-eye reduction, auto)
The flash fires automatically according to the brightness 
of the subject. The assist lamp lights up to reduce the 
red-eye effect.
 (flash on)
The flash always fires.
 (flash off)
The flash does not fire.
PHOTO button
Flash
 (flash) button
Assist lamp