Canon EOS1DBODY 用户手册

294

Whenever you set the power switch to <1/R> or <2>, the 
Self Cleaning Sensor Unit operates to automatically shake off the dust 
on the front of the sensor. Normally, you need not pay attention to this 
operation. However, you can select to perform sensor cleaning at any 
time, or disable it.

 

Under the [53] tab, select [Sensor 
cleaning], then press <0>.

Select [Clean nowf].

 

Select [Clean nowf], then press 
<0>.

 

Select [OK] on the dialog screen, 
then press <0>.

X

The screen will indicate that the 
sensor is being cleaned. Although 
there will be a shutter sound during 
the cleaning, a picture is not taken.

 

In step 2, select [Auto cleaningf] and set it to [Disable].

X

The sensor cleaning will no longer be executed when you set the 
power switch to <1/R> or <2>.

f Automatic Sensor Cleaning

 

For best results, perform the sensor cleaning with the camera placed 
upright and stable on a table or other flat surface.

 

Even if you repeat the sensor cleaning, the result will not improve much. 
Immediately after the sensor cleaning is finished, the [Clean nowf] 
option will remain disabled temporarily.

COP

Y