Canon DC220 说明手册

 Playback

- “ready and waiting” to resume 
recording. 
• Sometimes the standby lamp will 
flash as the camcorder completes 
some preparations. The camcorder is 
Quick-Start ready when the lamp stops 
flashing and stays on.

Within approx. 1 second, the 
camcorder is ready in record pause 
mode.

NOTES

 

When you wake up the camcorder from 

standby mode, the following settings will be 
changed automatically:
- Manual focus returns to automatic focus (AF).
- Manual exposure adjustment returns to 
automatic exposure.
- Zoom position returns to full wide angle 

W.

 

In standby mode, the camcorder consumes 

only half the power used in record pause mode. 
Using this mode you can save energy when 
using a battery pack.
 

The camcorder will shut off if left in the Quick-

Start ready mode for 10 minutes, regardless of 
the [POWER SAVE] setting (

50). You can 

select the length of time until shut-off with the 
[

STANDBY OFF] setting (

50).

To restore the power if the camcorder shut off, 
slide the power switch toward MODE and 
release it, or move the power switch to 

 and 

back to ON again.
 

If you perform any of the following actions 

while in standby mode (while the standby lamp 
is on), the camcorder will return to record pause 
mode.
- Open the disc compartment cover.
- Slide the power switch toward MODE.
- Change the position of the 

/

 switch.

Playback

Playing Back the Video

POINTS TO CHECK

 For some operations you 

can also use the buttons on the wireless 
controller.

The green PLAY indicator will turn on.

The scene index screen appears with 
the selection frame on the first scene.

QUICK START

Playback

(

12)

D119_NTSC-E.book  Page 39  Monday, December 18, 2006  10:14 AM