Konica Minolta Xt 用户手册

84

CONNECTING THE CAMERA TO A COMPUTER

A fully charged battery should be used when the camera is connected to a computer. The use of the
AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98
or 98SE, read the section on page 86 on how to install the necessary USB driver before connecting
the camera to a computer.

5 Turn on the camera to initiate the USB connection. While the camera is connected

to a computer, the data-transfer screen will be displayed.

4. Attach the other end of the USB cable to the computer’s USB port. Make sure

the plug is firmly attached. The camera should be connected directly to the
computer’s USB port. Attaching the camera to a USB hub may prevent the cam-
era from operating properly.

3. Slide the AV-out terminal / USB-port cover open. Insert the

small plug of the USB cable into the camera. Make sure
the plug is firmly attached.

1. Start up the computer. The computer must be turned on before connecting the camera.

2. Insert the memory card into the camera. To change the memory card while the camera is connect-

ed to a computer, see page 94.

The charger can be used as a
camera stand. When the cam-
era is on, the charger does not
charge or supply power to the
camera.