Konica Minolta A200 用户手册
161
Pictures are
not sharp.
not sharp.
Focus signal is
red.
red.
Subject is too close.
Make sure the subject is within
the autofocus range (0.5m - ∞
/ 1.6 ft - ∞) or use the macro
mode (p. 49).
the autofocus range (0.5m - ∞
/ 1.6 ft - ∞) or use the macro
mode (p. 49).
A special situation is pre-
venting the autofocus
system from focusing (p.
33).
venting the autofocus
system from focusing (p.
33).
Use the focus-lock function to
focus on an object at the same
distance as the subject (p. 32)
or use manual focus (p. 45).
focus on an object at the same
distance as the subject (p. 32)
or use manual focus (p. 45).
Pictures are
taken indoors
or in low-light
situations with-
out flash.
taken indoors
or in low-light
situations with-
out flash.
Slow shutter speeds
result in blurred images
when the camera is
hand-held.
result in blurred images
when the camera is
hand-held.
Use Anti-shake or a tripod,
change the camera sensitivity
to a higher setting (p. 66), or
use the flash (p. 34).
change the camera sensitivity
to a higher setting (p. 66), or
use the flash (p. 34).
While using
flash, the pic-
tures are too
dark.
flash, the pic-
tures are too
dark.
The subject is beyond the flash range (p.
67).
67).
Move closer to the subject or
change the camera sensitivity
to a higher setting (p. 66).
change the camera sensitivity
to a higher setting (p. 66).
Problem
Symptom
Cause
Solution
Lens hood
mounted when
using flash.
mounted when
using flash.
The lens hood blocks the
light from the built-in
flash.
light from the built-in
flash.
Always remove the lens hood
when using the built-in flash.
when using the built-in flash.
A shadow
appears on
the bottom of
the image.
appears on
the bottom of
the image.