Konica Minolta DiMAGE 7i 用户手册
89
Press and hold the mounting-foot-release button (2) to dis-
engage the safety catch to remove the flash unit from the
camera.
engage the safety catch to remove the flash unit from the
camera.
Position the camera and flash around the subject. See the
following page for the camera-to-subject and flash-to-subject
ranges. Make sure no objects come between the camera
and flash unit.
following page for the camera-to-subject and flash-to-subject
ranges. Make sure no objects come between the camera
and flash unit.
Raise the built-in flash on the camera. The wireless flash indicator (WL) will be dis-
played in the top left corner of the live image. The number next to it indicates the
channel in use. Press the shutter-release button partway down to charge the built-
in flash; the flash signal will turn white when charged.
played in the top left corner of the live image. The number next to it indicates the
channel in use. Press the shutter-release button partway down to charge the built-
in flash; the flash signal will turn white when charged.
When the 5600HS(D) and 3600HS(D) flash is charged, the AF illuminator on the
front of the unit will blink (3). Take a picture as described in the basic operating
section on page 31.
front of the unit will blink (3). Take a picture as described in the basic operating
section on page 31.
The flash units can be test fired by pressing the spot AE lock button on the cam-
era. If the flash does not fire, change the camera, flash, or subject position. The
spot AF/AEL option in the basic section of the recording-mode menu must be set
to AE hold or AE toggle. If AF/AE hold or AF/AE toggle is active, the flash will not
fire. The slow-shutter-sync function will be active in P and A exposure modes (p.
87).
era. If the flash does not fire, change the camera, flash, or subject position. The
spot AF/AEL option in the basic section of the recording-mode menu must be set
to AE hold or AE toggle. If AF/AE hold or AF/AE toggle is active, the flash will not
fire. The slow-shutter-sync function will be active in P and A exposure modes (p.
87).
3
2