Canon 9593B002 用户手册
Remote Operation of the Camcorder
44
Remote Operation of the Camcorder
The camcorder can be operated remotely in a number of different ways with varying degrees of control. First, you
can use the supplied wireless controller as described below. You can also connect an optional RC-V100 Remote
Controller for maximum control of your recordings at a professional level.
Finally, using the camcorder's network functions, you can connect any device with a Web browser either
wirelessly (via Wi-Fi) or through a LAN cable and use the Browser Remote application to control the camcorder
(A 182).
can use the supplied wireless controller as described below. You can also connect an optional RC-V100 Remote
Controller for maximum control of your recordings at a professional level.
Finally, using the camcorder's network functions, you can connect any device with a Web browser either
wirelessly (via Wi-Fi) or through a LAN cable and use the Browser Remote application to control the camcorder
(A 182).
Using the Supplied Wireless Controller
Inserting the Battery
Insert the supplied CR2025 lithium button battery into the wireless
controller before use.
controller before use.
1 Press the tab in the direction of the arrow (
햲) and pull out the battery
holder (
햳).
2 Place the lithium button battery with the + side facing up (
햴).
3 Insert the battery holder (
햵).
Activating the Wireless Controller
By default, the wireless controller is activated. If it has been deactivated,
follow the procedure below to activate it.
follow the procedure below to activate it.
1 Open the [Wireless Controller] submenu.
[w Other Functions] > [Wireless Controller]
2 Select [On] and then press SET.
NOTES
• If you set an assignable button to [Wireless Controller] (A 129), you can press the button to activate/
deactivate the use of the supplied wireless controller.
Using the Wireless Controller to Operate
the Camcorder
the Camcorder
When using the wireless controller, point it at the
camcorder’s remote sensor. When the wireless
controller’s buttons are operated, the camcorder’s
tally lamps will illuminate.
camcorder’s remote sensor. When the wireless
controller’s buttons are operated, the camcorder’s
tally lamps will illuminate.
NOTES
• When you use the START/STOP button or ZOOM
buttons on the supplied wireless controller, you
must press the record enable button
simultaneously with the desired button.
must press the record enable button
simultaneously with the desired button.
• When the camcorder cannot be operated with the supplied wireless controller, or when it can only be operated
at very close range, replace the battery.
• The supplied wireless controller may not work properly when the remote sensor is located under strong light
sources or direct sunlight.
Operating modes:
햲
햳
햵
햴
[w Other Functions]
[Wireless Controller]
[On]
COP
Y