Planet Technology CAM-ISD48 用户手册

5.3  Embed Camera Into Ceiling 

 

Step 1     make holes  

 

To insert the speed dome into the ceiling, first 

a hole must be properly made to let the dome 

be through for hanging. 

 

The best way to decide the diameter of the 

hole, and the spots for mounting screws, is to 

use the supplied metal holder.   
 

„ 

Put the holder on the surface of the target location and mark a circle with 

pencil or color marker 

„ 

Also mark out the spots for screws with the screw holes on the holder 

„ 

Cut the camera hole alone with the curve   

„ 

Drill holes for screw in 6 mm (1/4”) on the three marked spots; 

 

     

   

The decoration ring is not just for nice looking, 

but also the piece to hold the camera in place 

for embedded mounting.   

 

To integrate the ring to camera: 

1. 

Take the transparent dome cover off 

2. 

Locate the ring to the bottom side of the 

cover 

3. 

Put the cover back to the camera 

 

Step 3 

  Mount the camera through the hole   

Take the below steps to make the camera cling 

to ceiling: 

 

1. 

Place the auxiliary metal bracket onto the 

top of the ceiling 

2. 

Put the camera through out the hole 

3. 

Align the screw holes of the decoration 

ring and the auxiliary bracket 

4. 

Put screws through and tighten the two 

brackets, with the ceiling in between 

.

. 

User’s manual 

                                                                                                     

19