Planet Technology CAM-ISD48 用户手册

7.2  Connect single dome to console 

 

 

„ 

Connect the RS-485 of camera to controller 

(such as a keyboard

) with a pair of 

twisted cable. Tele-control is sent via the cable between dome and controller.   

„ 

Video signal from the dome is sent to multiplexer, monitor, DVR or video server 
directly, normally through coaxial cable (usually the RG-59 A/U).   

„ 

Power (DC12V or AC24V) shall be applied to the camera via separate DC or 

AC adapter.   

„ 

Usually the termination resistor in speed dome is set to OPEN when only one 
is connected console. 

„ 

Select a proper protocol and corresponding baud rate for the controller. Be 
sure both sides (camera and controller) have the same protocol and baud rate. 

 

 
 

 

 
 
 

 

 

.

. 

User’s manual 

                                                                                                     

32