Canon SL1 用户手册

下载
页码 388
110
1
Select [Drive/self-tmr].
 
Under the [z1] tab, select [Drive/
self-tmr
], then press <0>.
X
[Drive/self-timer mode] will appear.
2
Select the self-timer.
 
Press the <Y> <Z> keys to select 
the self-timer, then press <0>.
Q
10-sec. self-timer
The remote controller can also be used (p.309).
l
2-sec. self-timer (p.147)
q
10-sec. self-timer plus continuous shots
Press the <W> <X> keys to set 
the number of multiple shots (2 to 
10) to be taken with the self-timer. 
3
Take the picture.
 
Look through the viewfinder, focus the subject, 
then press the shutter button completely.
X
You can check the self-timer operation with 
the self-timer lamp, beeper, and countdown 
display (in seconds) on the LCD monitor.
X
Two seconds before the picture is 
taken, the self-timer lamp will light up 
and the beeper will sound faster.
j
 Using the Self-timer
 
With <q>, the interval between the multiple shots may be prolonged depending 
on the shooting functions settings such as the image-recording quality or flash.
 
If you do not look through the viewfinder when you press the shutter 
button, attach the eyepiece cover (p.310). If stray light enters the 
viewfinder when the picture is taken, it may throw off the exposure.
 
After taking self-timer shots, playing back the image (p.89) to check 
focus and exposure is recommended.
 
When using the self-timer to shoot only yourself, use focus lock (p.61) on 
an object at about the same distance as where you will stand.
 
To cancel the self-timer, either touch the LCD monitor or press <0>.
COP
Y