Concord Camera 3047 用户手册

10

GETTING STARTED

Press the memory card into the slot then release. When the card is partially ejected, pull it out.

Note:If the “Memory Full! ” warning message appears on the LCD, it means the SD card or 

internal memory is full. Please remove the memory card and insert a new one or transfer all 

images to your computer.

Press the Power button to turn the camera on. The green Power lamp will light up, the LCD will turn 

on automatically. 

 

After one minute of  inactivity, the LCD will automatically power off. Then the camera will automatically 

power off after being idled for around 3 minutes by default. To power off the camera sooner, press the 

Power button.

When you first use your camera or when the batteries are removed for an extended time 

(approximately 120 minutes), you will need to set the Date and Time . The date and time information 

will be displayed on the picture if date stamp is turned on.

1. Slide the Function switch to

(Capture mode).

2. Press the MENU button.

3. Press the

or

button to select Ad (Advance), and 

then press the Enter button to enter its sub-menu.

4. Press the

or

button to select Date Time, and 

then press the Enter button.

5. Press the

or

button to highlight the field to be 

changed, and then press the

or

button to set the 

value.

6.  Press the

or

button to highlight Date stamp, 

then press the Enter button to turn the function on. 

7.  When the setting is completed, press the MENU button to return to capture mode.