Concord Camera 5062AF 用户手册
44
En
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
To restore the default settings in your camera:
1. Press when Restore Default is highlighted in the camera.
2. Press or to select No or Yes.
1. Press when Restore Default is highlighted in the camera.
2. Press or to select No or Yes.
• When No is selected, no change is made. The LCD returns to the previous screen.
• When Yes is selected, the LCD shows “Are you sure?”
• When Yes is selected, the LCD shows “Are you sure?”
3. Press or to select Yes or No.
• If No is selected, no change will be made. The LCD returns Setup page.
• If Yes is selected, the camera will be reset to the factory default setting. The LCD will show “Restoring...”
• If No is selected, no change will be made. The LCD returns Setup page.
• If Yes is selected, the camera will be reset to the factory default setting. The LCD will show “Restoring...”
for a few seconds and then return to setup page. The Default settings will be restored.
Note: Please refer to the table below for the default settings.
OPTION DEFAULT
STATUS
Camera Mode
Single Shot
Image Size
2560 x 1920 (Concord Eye-Q 5062 AF); 2272 x 1704 ( Concord Eye-Q 4062 AF)
Quality Normal
Flash Auto
Flash
White Balance Auto
LCD Brightness
Center (0)
Scene Selection OFF
Exposure Compensation 0
ISO Auto
Metering Matrix
Photo Effect
None
Time Out 2 min
Slide Show Interval
2 Seconds
Beep ON
Quick View
1 Sec
AF Mode
Multi-Area
Continuous Repeat
No
AF Assist Light
Auto
TV Mode
NTSC for USA/Japan, PAL for Europe/Asia
Date/Time Format
USA/Japan: MM/DD/YYYY, 12-hour
Europe/Asia: DD/MM/YYYY, 24-hour
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
DC4062-5062 UG(514173-00)-E 44
5/31/04, 10:14:27 AM