Concord Camera 2040 用户手册

8

GETTING STARTED

The power button is located in the back of the camera.

1. Press the (       ) Power button to turn the camera on. (fig.1.1)

• The LCD will turn on automatically. (fig.1.2)
• The camera is ready for picture taking when the flash ready

LED stops blinking. (fig.1.3)

2. To turn the camera off press the (       ) Power button for a few

seconds

Note:
• To extend battery life, the camera will automatically power off

after 60 seconds of inactivity. To change this setting, please refer
to page 25. 

• Digital cameras use much more power than traditional cameras.

It is highly recommended that you use the automatic power off
feature. It is also recommended that  the LCD display be turned
off  or brightness tuned down to save power.

• To protect the LCD from damage during transportation, the LCD

is covered with a thin plastic film. For clearer view of pictures,
please peel off the protective film before use.

The camera has a 1.5” LCD which can frame subjects for image and video clip capture,
review stored images and video clips and displays the current camera settings.

Use the (       ) button to toggle through the LCD modes. The LCD mode changes each time
the button is pressed as follows:

"

#

Icons off

"

$

LCD off

"

%

LCD on with icons

Note: In Review mode, press the (       ) button, the LCD or icons can’t be turned off.

fig.1.1   Camera On

fig.1.2 

fig.1.3 

2040 Manual-4L (512950-00)  2003:09:06  2:05 PM  Page 8