Concord Camera JD C3.1z3 用户手册

6

When the camera is powered on for the first time, the Language, Date and Time menus will appear.

1.  Press      or      to highlight the desired language. (fig. 1.1)
2. Press the OK button to select. The next screen will show the DATE/TIME SETUP page. (fig. 1.2)
3.  Press      to highlight the Date field, the Time field, the Date Format field or the Time Format field. The 

selected segment will blink. 

4.  Press      or      to change the number in the blinking position, press      to go to the next field.
5. Press the OK button to exit DATE/TIME setting. The next screen will display live view.
    

Note:
1.  For each language, there is a default setting on Date format and TV broadcast standard.  To change the TV 

broadcast standard, refer to page 59..

 

Language(s) 

Date Format Setting 

 

English / Español / 

MM/DD/YYYY 

NTSC   

 

 
 

Francis / Deutsch 

DD/MM/YYYY 

PAL

 /Italiano/ 

Nederlands/Português 

 

 

  

YYYY/MM/DD 

PAL 

 

 

 

2.  If the batteries are removed or flat for about 4 minutes, the time setting will resume to factory settings. When 

the camera is powered on again, the DATE/TIME setup screen will appear on the LCD. To reset date/time, 
follow steps 2-5 above; to skip the date/time setting, press the OK button. You can set the date/time at a later 
time. For instructions, refer to p.40.

GETTING STARTED

1

3

5

3

2

OK

01

 - 01 - 2004

01 : 01 AM
MM - DD - YYYY
12 - HOUR

1

3

5

3

2

fig. 1.1

fig. 1.2