Zebra Technologies 45537L-005 用户手册

External PSII

04/21/2009

ZebraNet PrintServer II User Guide

45537L-005

 

Secure the wire locks.

On the back of the 

PSII

, insert a live 10BASE-T cable into the Ethernet connector.

Turn on the printer. 

A red status indicator blinks during the Power On Self Test (POST) and changes to green 
when the initialization is finished.

The 

Test

 button is a small hole on the 

PSII

 device. To press it, you need to insert 

something small into the hole, like a paperclip.

Press the 

Test

 button located on the bottom of the 

PSII

. This prints out a 

PSII 

configuration label.

This table shows you how to determine the minimum label width needed to print a 

PSII

 

configuration label for printers with firmware version 7 or lower:

Parallel connector

Label length, DPI and your firmware version:

For all printers, the minimum label length is 4 in. (10.16 cm). 

For printers with firmware version 7.01 and higher, regardless of the dpi, a 

 

2-inch (5 cm) label prints 

For printers with firmware version 7 and lower, see the table that follows. 

600

1.25

300

2.50

200

3.69

150

5.0