Nikon 5000ED 用户手册

35-mm slides (one slide at a time)

MA-21 slide mount adapter

35-mm fi lm in strips of two to six frames

SA-21 strip fi lm adapter

The adapters provided with the SUPER COOLSCAN 5000 ED and COOLSCAN V ED can be 
used to scan 35-mm fi lm mounted as individual slides or in strips of two to six frames.

1 

Choose an adapter

2 

Check the status LED
Make sure that the status LED is glowing steadily.  Do 
not insert adapters or fi lm while the status LED is blink-
ing.

3 

Insert the adapter
Slide the adapter into the adapter slot.  When the adapter is fully inserted, the status LED 
will blink for about 30 seconds (5000 ED) or 20 seconds (COOLSCAN V ED).

SA-21 strip 

fi lm adapter

MA-21 slide 

mount adapter

SA-21 strip fi lm 
adapter

MA-21 slide mount 
adapter

Before removing adapters from the scanner, eject the fi lm or slide (

 38) and check that the status LED 

has stopped blinking.  Remove adapters as shown.

Optional adapters and fi lm holders are available for a variety of fi lm, including single-frame strips of 35-
mm fi lm, APS (IX-240) fi lm cartridges, glass microscope slides, and rolls of developed 35-mm fi lm up to 
forty frames in length (5000 ED only).  See “Optional Holders and Adapters” (

 48).