Nikon 5000ED 用户手册

The FH-3 allows strips of 35-mm fi lm up to six frames in length to be scanned in the MA-
21 slide-mount adapter.  The FH-3 can be used to scan fi lm that can not be scanned in the 
SA-21, either because it is only one frame long or because it has excessive curl or damaged 
perforations (

 58).

1 

Open the holder
Holding the FH-3 with the Nikon logo 
uppermost, unlatch the holder snaps 
and open the holder.

2 

Place fi lm in the holder
Place  a strip of 35-mm fi lm base up 
(matte emulsion surface down) in the 
bottom half of holder.  Align the frame 
to be scanned with an aperture in the 
bottom half of the holder.

Nikon logo

Aperture

When fi lm is examined under bright light, the image on the emulsion surface will be in slight relief, with 
bumps and hollows where the image has been developed.  The opposite surface (the fi lm base) will be 
refl ective and smooth.  Place the fi lm in the holder base up.

Snap shut

4 

Align the fi lm with an aperture
Slide the black plastic holder until the 
frame to be scanned is aligned with one 
of the two apertures in the metal cover.

Apertures

3 

Close the holder
Close the holder and align the ends of 
the top and bottom halves.  Latch the 
holder cover and snap the top and bot-
tom halves together at both ends.

Snap