Toshiba IK-TF9U 用户手册
22
• Serial baud rate 9600, 19200
-- OPTION --
BAUD RATE
9600
Move up down
By pushing
MENU UP, DOWN
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN
DATA UP, DOWN
(4. 5) Changing the shading correction mode
1
Set the "
→
" to SHAD. by pushing [MENU UP], [MENU DOWN] buttons.
2
Set the SHAD. by pushing [DATA UP], [DATA DOWN] buttons.
Note: The alignment value for shading is fixed to "0" when selecting SHAD. OFF. MANU is not dis-
played in the menu.
(4. 6) Changing the manual shading correction setting
1
Set the "
→
" to MANU by pushing [MENU UP], [MENU DOWN] buttons.
2
Set the MANUAL SHADING by pushing [DATA UP], [DATA DOWN] buttons.
( 6 ) OPTION
(6. 1) Changing serial communication baud rate
1
Set the "
→
" to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either 9600 or 19200 by pushing [DATA UP], [DATA DOWN] buttons.
• H PHASE -100 to 100
• Sync system display
-- SYNC --
MODE EXT
H PHASE
H PHASE
0
Move up down
By pushing
MENU UP, DOWN
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN
DATA UP, DOWN
(5. 1) Adjusting horizontal phase
1
Set the "
→
" to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
2
Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
( 5 ) SYNC
When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external
sync) automatically.
sync) automatically.