Channel Vision 6106 用户手册

  

15

 

1.  Mount the camera on the mounting bracket by using the hole on the top or bottom 

of the camera, and by using the enclosed mounting block, secured by 2 screws. 

2.  Connect the video output to the monitor or other video device via a 75 Ohms type 

coaxial cable. 

3.  Power Input Terminal (Dual Power): the camera accepts both AC 24V and DC 12 V 

power sources (non-polarity).   

 

OPEN 

Brightness + 

CLOSE 

Brightness - 

Twist Joystick clockwise or Zoom In 

Zoom Tele 

Twist Joystick counterclockwise or Zoom Out

Zoom Wide 

NEAR 

None 

FAR 

None 

Move Joystick Left 

None 

Move Joystick Right 

None 

Move Joystick Up 

None 

Move Joystick Down 

None 

Enter 95; Hold the PRESET key (approximately five 

seconds) until the main menu appears on the screen.

Accessing OSD Main Menu 

Note:

    CLOSE  /  OPEN  adjustments  are  required  to  meet  the  EXPOSURE  MODE  settings,  size 

LEVEL is only adjustable when the option is under  [WDR], [BLC USER], and [NORMAL]. 

OPEN 

Sub Menu Enter 

CLOSE 

Sub Menu Exit 

NEAR 

Cursor Up 

FAR 

Cursor Down 

Move Joystick Left 

Decrease (-) 

Move Joystick Right 

Increase (+) 

Move Joystick Up 

Cursor Up 

Move Joystick Down 

Cursor Down 

Twist Joystick clockwise or Zoom In 

None 

Twist Joystick counterclockwise or Zoom Out

None 

Note:

Please refer to PELCO Keyboard (or compatible) manual for more information.