Panasonic VDR-M30PP 用户手册
55
QR34662
Recording Stills
Note
:
Recording of still images is possible on DVD-RAM disc and
card.
card.
1
Turn the DVD Palmcorder on.
When using DVD-RAM disc:
Set the power switch to “
Set the power switch to “
PHOTO”.
When using card:
Set the power switch to “
Set the power switch to “
PHOTO”.
After the ACCESS indicator goes out, perform
the subsequent operation:
the subsequent operation:
2
Check the subject on the screen (viewfinder or
LCD).
LCD).
3
Press the REC button.
The DVD Palmcorder automatically focuses on
the subject at the center of screen (when auto
focus is selected).
the subject at the center of screen (when auto
focus is selected).
The screen will be black, and then the recorded
still will be displayed. When the “
still will be displayed. When the “
.” mark
appears, you can proceed with the next
recording; while “DISC ACCESS” or “CARD
ACCESS” is being displayed, you cannot
proceed with the next recording.
recording; while “DISC ACCESS” or “CARD
ACCESS” is being displayed, you cannot
proceed with the next recording.
4
Set the power switch to “POWER OFF” to turn
the DVD Palmcorder off.
the DVD Palmcorder off.
Note
:
•
See “Still recording quality” on page 56 for details of stills
on card.
on card.
•
Do not operate the power switch or remove the card while
the ACCESS/PC or CARD ACCESS indicator is lit or
blinking: Doing so may damage the card or the data on
card.
the ACCESS/PC or CARD ACCESS indicator is lit or
blinking: Doing so may damage the card or the data on
card.
ACCESS/PC
indicator
indicator
CARD
ACCESS
indicator
ACCESS
indicator
Power switch
8 : 0 0 AM
S E P 3 0 2 0 0 3
9 9 9
REM
Still recording mode
Number of recordable stills
(When using DVD-RAM disc)
FINE
9 9 9
REM
8 : 0 0 AM
S E P 3 0 2 0 0 3
(When using card)
VDR-M30PP_GB.book Page 55 Friday, March 14, 2003 8:53 PM