Panasonic AJ-PX5000G 用户手册

下载
页码 209
– 42 –
Chapter 3 Recording and Playback — Proxy recording
Recording mode
File format
Codec
Number of channels
Bitrate per channel
Sampling frequency
[SHQ 2CH MOV]
MOV
LPCM
2ch
768 bps
48 kHz
[HQ 2CH MOV]
MOV
AAC-LC
2ch
64 kbps
48 kHz
[HQ 4CH MOV]
MOV
AAC-LC
4ch
64 kbps
48 kHz
[LOW 2CH MOV]
MOV
AAC-LC
2ch
64 kbps
48 kHz
Recording the proxy data
Select [P2] or [P2&SD] in the main menu → [REC/PB] → [PROXY SETUP] → [REC MEDIA] and press the <REC> button to start proxy recording at the 
same time as recording of the sources.
Push the <MODE CHECK/MENU CANCEL> switch towards the <MCK/MCL> side three times to display the proxy data recording information on the 
viewfinder screen.
Recording to the SD memory card
To record the proxy data, use SD, SDHC, or SDXC memory cards with an indication of class2 or higher. For the latest information not included in these 
Operating Instructions, refer to the support desk at the following website.
http://pro-av.panasonic.net/
When recording the proxy data to an SD memory card, always format the card using the camera.
Checking the SD memory card
Insert the SD memory card into the camera.
Select the main menu  [FILE]  [SD CARD PROPERTY] (or the main menu  [CLIP]  [PROPERTY]  [SD CARD]).
 
f
The format status is displayed in [SD STANDARD].
If [NOT SUPPORTED] is displayed, format the card with the camera.
 
f
In the [PROXY REM] item, check the remaining recording time of the proxy data.
The remaining SD memory card capacity displayed ([PROXY REM]) indicates the remaining proxy recording, but it may differ from the actual 
available space. If short recordings are repeated, the available recording time may decrease significantly compared to the available space. When 
the remaining capacity exceeds 999 min, [999min] is displayed.
If the proxy is not recorded to the SD memory card, the remaining time is not displayed.
 
f
In the [NUMBER OF CLIPS] item, check the number of clips recorded in the SD memory card.
If the number of clips is 1000 or more, no additional proxy data can be recorded to the SD memory card even if there is available capacity.
 
f
Shot marks and text memos cannot be added to the clips in the SD memory card,
 
f
Deleting the clips recorded on the P2 card on the thumbnail screen does not delete the proxy data recorded on the SD memory card.
 
f
The proxy data cannot be recorded to the SD memory card containing data for updating.
@
@
NOTE
 t While recording to the SD memory card, the remaining capacity can be checked with the mode check on the viewfinder screen.
 t If proxy data cannot be recorded to the SD memory card even when the main menu → [REC/PB] → [PROXY SETUP] → [REC MEDIA] → [P2&SD] 
 t Data deleted as a result of formatting cannot be restored. Always check the data before formatting.
Formatting SD memory cards
Insert the SD memory card into the camera.
Select [YES] in the main menu  [FILE]  [FORMAT SD CARD].
This completes formatting the SD memory card.
Proxy data recording time (approximate)
Recording mode
Total recording rate
Recording time
 (per 1 GB)
STD 2CH MP4
Approx. 1650 kbps
Approx. 78 min
SHQ 2CH MOV
Approx. 5060 kbps
Approx. 25 min
HQ 2CH MOV
Approx. 1650 kbps
Approx. 78 min
HQ 4CH MOV
Approx. 1780 kbps
Approx. 72 min
LOW 2CH MOV
Approx. 950 kbps
Approx. 135 min
(These are reference values for continuous recording with Panasonic products. The recording time may differ depending on the scene or the number of 
clips)
Checking the proxy data
 
f
The [ ] indicator is displayed for the material clips with the proxy data recorded.
 
f
The detailed information of the recorded proxy data can be viewed in the clip property.
For details on operations, refer to “Checking detailed information of the proxy data” (page 43).
 
f
The proxy data is recorded to the P2 card or SD memory card as a video/audio file and real-time metadata file.