Panasonic PV-GS83 用户手册

Before using

LSQT1181

ª

Lights up: Charging
Goes off: Charging completed
Flashing: The battery is over discharged 

(discharged excessively). In a while, 
the lamp will light up and normal 
charging will start.
When the battery temperature is 
excessively high or low, the [CHARGE] 
lamp flashes and the charging time will 
be longer than normal.

ª

Connect the DC cable to this product.
≥The output plug of the AC cable is not 

completely connected to the AC adaptor jack. 
As shown in 

1, there is a gap.

≥Do not use the power cord for other 

equipment since the power cord is exclusively 
designed for this Camcorder. Do not use the 
power cord from other equipment for this 
Camcorder.

ª

Push the battery against the battery holder and 
slide it until it clicks.

ª

While sliding the [BATTERY] lever, slide the 
battery to remove it.

≥Hold the battery with your hand so it does not 

fall.

≥Before removing the battery, be sure to set the 

[OFF/ON] switch to [OFF].

1

Danger of explosion if battery is incorrectly 
replaced. Replace only with the same or 
equivalent type recommended by the 
manufacturer. Dispose of used batteries 
according to the manufacturer’s instructions.

BATTERY

S5650.book  13 ページ  ２００６年１２月５日　火曜日　午前１０時５２分