Panasonic PV-GS33 用户手册
Editing Mode
-37-
Editing Mode
Audio Dubbing
You can add music or narration to the recorded
Cassette.
≥If the tape recorded in the [16bit] Mode is
Cassette.
≥If the tape recorded in the [16bit] Mode is
dubbed with the Audio Dubbing function, the
original sound is erased. (If you wish to
preserve the original sound, use the [12bit]
Mode when recording.)
original sound is erased. (If you wish to
preserve the original sound, use the [12bit]
Mode when recording.)
≥Audio Dubbing cannot be performed on a
recording made in LP Mode. (
1
Press the [
;] Button
on the Remote
Controller where you want to add new
sound.
sound.
2
Press the [A.DUB] Button
on the
Remote Controller.
3
To start Audio Dubbing, press the [
;]
Button
on the Remote Controller.
To Cancel Audio Dubbing
Press the [
Press the [
;] Button
on the Remote
Controller.
The Camcorder is in the Still Playback Mode
again.
The Camcorder is in the Still Playback Mode
again.
To Play Back the Sound Recorded by 12bit
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Audio Dubbing
Set [TAPE PLAYBACK MENU] >> [PLAYBACK]
>> [12bit AUDIO] >> [ST2] or [MIX].
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio
Dubbing.
MIX: It plays back both the original sound and the
sound added by Audio Dubbing
simultaneously.
simultaneously.
To Dub Audio While Listening to a
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
Use headphones to listen to the pre-recorded
sound while dubbing the audio.
Pre-recorded Sound
When pausing the audio dubbing, set the
[12bit AUDIO] on the [PLAYBACK] Sub-Menu to
[ST2] and you can check the pre-recorded sound.
Use headphones to listen to the pre-recorded
sound while dubbing the audio.
≥For other notes concerning this item, see
.
INDEX
INDEX
SELECT
STOP
K
L
∫
V
/REW
STILL ADV
T
W
s
VO
L
r
¥REC
MULTI/
P-IN-P
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
6
1
5
;
E
D
P.B. ZOOM
Copying on an S-VHS (or a VHS)
Cassette
Cassette
(Dubbing)
After connecting the Camcorder and the VCR
as illustrated, start the following procedures.
After connecting the Camcorder and the VCR
as illustrated, start the following procedures.
) on the
Remote Controller prior to copying so that no
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
indications are visible. Otherwise, the displayed
tape counter and function indications are also
copied.
Camcorder:
1
Insert the recorded Cassette.
VCR:
2
Insert an unrecorded Cassette with an
erasure prevention tab.
≥If various setups (such as external input, tape
erasure prevention tab.
≥If various setups (such as external input, tape
speed, etc.) are required, please refer to the
operating instructions of your VCR.
operating instructions of your VCR.
Camcorder:
3
Press the [
to start playback.
VCR:
4
Start recording.
5
Press the Pause or Stop Button to stop
recording.
recording.
Camcorder:
6
Press the [
∫] Button
1
2
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
S-VIDEO
OUT
A/V OUT
PHONES
REMOTE/MIC
(PLUG IN POWER)
DV