Panasonic PV-GS180 用户手册
Record mode
28
LSQT0973
Recording still pictures on a card
while recording image onto a tape
while recording image onto a tape
You can record still pictures while recording
image onto a tape.
≥Set to Tape Recording Mode.
image onto a tape.
≥Set to Tape Recording Mode.
1
Press the [PHOTO SHOT] button fully while
recording image onto a tape.
recording image onto a tape.
≥For the number of still pictures to be recorded
on a card, refer to
-74-
.
≥When recording pictures onto a card, the
recording start/stop button is disabled.
≥You can select a picture quality for still pictures
to be recorded. (
-30-
)
≥In tape recording mode, the size of pictures that
can be recorded is [640].
≥In order to record higher quality still pictures,
you must use the card recording mode.
≥If the wide mode is used, you cannot record
images onto the card.
≥The [PHOTO SHOT] button does not work if it is
pressed halfway.
Check the recording
The last image recorded is played back for 2 to
3 seconds. After checking, the Camcorder will be
set to a recording pause.
≥Set to Tape Recording Mode.
3 seconds. After checking, the Camcorder will be
set to a recording pause.
≥Set to Tape Recording Mode.
1
Press the joystick during the recording
pause until the icon
pause until the icon
1 appears.
2
Move the joystick down to select the
recording check icon [
recording check icon [
].
Blank search function
Searches for the last part of the image recorded
(unused part of the tape).
≥Set to Tape Recording/Playback Mode.
(unused part of the tape).
≥Set to Tape Recording/Playback Mode.
1
Set [BASIC] or [ADVANCE] >>
[BLANK SEARCH] >> [YES].
[BLANK SEARCH] >> [YES].
ª
Stopping a blank search midway
through
through
Move the joystick down to select the [
∫] icon.
≥If the cassette tape has no blank part, then the
Camcorder will stop at the end of the tape.
≥The Camcorder stops at a point approx.
1 second before the end of the last image
recorded. When you start recording at that
point, the image can be recorded seamlessly
from the last image.
recorded. When you start recording at that
point, the image can be recorded seamlessly
from the last image.
PHOTO
SHOT
1
LSQT0973ENG.book 28 ページ 2006年1月30日 月曜日 午前11時40分