Panasonic DMCZS10K 用户手册
48
VQT3G90
VQT3G90
49
For details about the setting procedure in the [Setup] menu (
Using the [Setup] menu
(Continued)
Item
Settings, notes
[Rotate Disp.]
Automatically rotate
portrait still pictures.
portrait still pictures.
: Rotate Display is turned on.
: Rotate Display is turned on for TV output only.
[OFF]
• [Rotate Disp.] cannot be used with motion pictures.
• Some pictures taken facing up or facing down may not
be rotated automatically.
• Pictures cannot be rotated during Multi Playback.
• Will only be displayed rotated on computer if in Exif-
compatible (
[Version Disp.]
Check the version of the
camera firmware.
camera firmware.
Current version is displayed.
[Format]
Use when [Built-In
Memory Error] or
[Memory Card Error]
appears, or when
formatting the built-in
memory or card.
Memory Error] or
[Memory Card Error]
appears, or when
formatting the built-in
memory or card.
When a card/built-in
memory is formatted,
the data cannot be
restored. Check the
content of the card/
built-in memory
carefully before
formatting.
memory is formatted,
the data cannot be
restored. Check the
content of the card/
built-in memory
carefully before
formatting.
• This requires a sufficiently charged battery, or an AC
adaptor (optional) and DC coupler (optional). When
formatting the built-in memory, remove the cards.
(Only inserted card will be formatted if present; built-in
memory will be formatted if no card is inserted.)
formatting the built-in memory, remove the cards.
(Only inserted card will be formatted if present; built-in
memory will be formatted if no card is inserted.)
• Always format cards with this camera.
• All protected pictures and other picture data will be
deleted.
• Do not turn off power or perform other operations during
formatting.
• Formatting the built-in memory may take several
minutes.
• Consult the dealer or your nearest Service Center if
format cannot be successfully completed.
Item
Settings, notes
[Calibration]
Perform these
adjustments if something
different from what
was touched has been
selected or if the camera
did not respond when it
was touched.
adjustments if something
different from what
was touched has been
selected or if the camera
did not respond when it
was touched.
Press [MENU/SET].
Touch [+] which is displayed on the screen (in 5 places)
Touch [+] which is displayed on the screen (in 5 places)
in sequence using the stylus pen (supplied).
Press [MENU/SET].
• If the proper positions were not touched, the touch
panel adjustments will not be performed. Touch the [+]
places again.
places again.
[Language]
Change display
language.
language.
Set the language displayed on the screen.
[Demo Mode]
View demonstration of
functions.
functions.
[Stabilizer Demo.]
Extent of jitter is shown on graph (estimate)
Extent of jitter is shown on graph (estimate)
Extent of jitter
Extent of jitter after correction
• During demo screen display, the Optical Image Stabilizer
switches ON and OFF every time [MENU/SET] is
pressed.
pressed.
• Cannot display during Playback Mode.
[Auto Demo]: View introductory Slide Show
[ON]/[OFF]
• [Auto Demo] cannot be displayed on external devices
such as TVs.