Panasonic AG-HVX200P 用户手册
Shooting
55
6
The screen below is displayed, so set the
fi le name of six letters using
,
,
or
button. Set the same as user information.
(Page 60)
• Characters that can be set
Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./
If the COUNTER RESET button is pressed
(Page 60)
• Characters that can be set
Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-./
If the COUNTER RESET button is pressed
when the fi lename has been set, the
characters are cleared.
characters are cleared.
7
After you fi nish setting the fi lename, press
the MENU button.
• The name change will not be completed
• The name change will not be completed
unless you have fi nished step 10.
8
Press button to select SAVE/INIT.
9
Press button, and use
button to select
YES. Press
button.
10
The following screen appears, select
YES, then press
YES, then press
button. (To return to
the menu level above, press the MENU
button.)
button.)
The message below appears, and the changes
to the scene fi le are complete.
to the scene fi le are complete.
11
Press MENU twice to exit the menus.
• The original scene fi le settings will be restored
when the power is turned off if SAVE has not
been selected.
been selected.
• To return the scene fi le settings to the factory
settings, select INITIAL in step 9, then do steps
10 to 11.
10 to 11.