Panasonic AG-HPX250EN 用户手册

111

Editing

Using a hard disk drive (PC mode: USB host)

In this mode, it is possible to connect to a hard disk
drive (HDD), store card data (EXPORT): Refer to
“Writing data on a hard disk drive” (Page 115), view
thumbnails of stored clips (EXPLORE): Refer to
“Viewing hard disk drive information” (Page 112), and
write data back to P2 cards (IMPORT): Refer to
“Writing data back to P2 cards” (Page 116).

Switching to the USB HOST mode

Select USB HOST in PC MODE SELECT on

the setting menu SYSTEM SETUP screen,

and press SET on the Operation lever.

• Refer to the section “Using the setup menus”

(Page 28 of Vol. 1) for menu operation.

PUSH MENU TO RETURN

REC FORMAT

CAMERA MODE

ASPECT CONV

SETUP

PC MODE SELECT

SCAN REVERSE

CAMERA

DVCPROHD/60i

24PA

OFF

LETTER BOX

REC SIGNAL

1080-59.9i

SYSTEM MODE

SYSTEM SETUP

USB HOST

USB DEVICE

Press MENU twice to exit the menus.

Turn the POWER/MODE switch to the MODE

position to illuminate the PB/THUMBNAIL

lamp, and then turn and hold it.

• The PC lamp illuminates, the camera enters

PC mode, and it goes to the thumbnail
screen.

• When a hard disk drive is connected, the

HDD indication in the upper right corner
stays illuminated. However, if this indicator
illuminates red, it means that the hard disk
drive is not in a usable state. Confirm the
HDD type/state.

USB HOST display

• In USB HOST mode, clips on P2 cards can

be displayed but video from the camera-

recorder or an external device cannot be

recorded.

Clips written to a hard disk must be written

back to a P2 card before it can be played

back.

· “Writing data back to P2 cards” (Page 116)

• You cannot return to standard mode from

USB HOST mode. Turn the power off and

then turn it back on again.