Panasonic DMC-LX100 用户手册

下载
页码 332
81
SQW0021
Recording mode
Taking pictures after setting the aperture value and shutter speed
Taking pictures after automatically setting the aperture value 
and shutter speed ([Program AE] Mode)
Take pictures using automatic aperture values and shutter speed settings in accordance 
with the brightness of a subject.
1
Turn the aperture ring to select [A] (AUTO)
2
Turn the shutter speed dial to select [A] (AUTO)
[Program AE] Mode is set and the recording mode icon changes 
to [P].
3
Press the shutter button halfway
 •If the aperture value and shutter speed flash red, you do not have 
the correct exposure.
250
0
125
60
30
15
5.6
4.0
2.0
2.8
Program Shift indication
4
While the numeric values are displayed in yellow (approximately 10 seconds), 
turn the control dial to change the values using Program Shift 
 •To cancel Program Shift, either turn off the camera or turn the control dial until the Program Shift 
indication turns off.
 •To correct the exposure, use the exposure compensation dial to adjust the compensation value. 
Enabling/disabling the exposure meter display
 →   [Custom] → [Expo.Meter] → [ON] / [OFF]
 
When you set this function to [ON], an exposure meter is 
displayed during Program Shift, aperture setting, and shutter 
speed operation.
 
Proper exposure is not possible in the range indicated in red.
 
If the exposure meter is not displayed, press the [DISP.] 
button to switch the display of the monitor. 
 
The exposure meter will turn off if no operation is performed 
for approximately 4 seconds.
Exposure meter
250
0
125
60
30
15
5.6
4.0
2.0
2.8