Panasonic AG-3DA1P 用户手册
80
Setup menu list (continued)
RECORDING SETUP screen
Item
Display
mode
Description of settings
REC FORMAT
(Camera) Selects the recording format.
When SYSTEM FREQ is set to 59.9 Hz
PH 1080/60i
PH 1080/30P
PH 1080/24P
PH 720/60P
PH 1080/4P represents native recording.
When SYSTEM FREQ is set to 50 Hz
PH 1080/50i
PH 1080/25P
PH 720/50P
•
MIC ALC
(Camera) Sets mic level auto control to ON or OFF.
ON OFF
Set to ON to reduce distortion at high input levels.
To adjust the recording level of audio signals (not related to this setting), use
the AUDIO LEVEL knobs.
MIC GAIN1
(Camera) Sets the input level of the external microphone connected to the INPUT 1
terminal. (Page 48)
-50dB -60dB
MIC GAIN2
(Camera) Sets the input level of the external microphone connected to the INPUT
terminal. (Page 48)
-50dB -60dB
TC/UB SETUP screen
Item
Display
mode
Description of settings
TC MODE
(Camera) Selects the correction mode of the internal time code generator when the time
code of the internal time code generator is recorded.
DF:
Uses the drop frame mode.
NDF: Uses the non-drop frame mode.
TC MODE is automatically set to NDF when you set recording frame rate of
recording format to 4P. (Only when SYSTEM FREQ is set to 59.9 Hz)
•
TCG
(Camera) Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation mode.
A slight time error may occur when switching to PB mode if the frame rate is
set to 4P. (Only when SYSTEM FREQ is set to 59.9 Hz)
REC RUN: The time code is advanced only when recording.
•
TC PRESET
(Camera) Sets the initial time code.
YES NO
Set the frame value to 0 or a multiple of 4 when you set recording frame
rate of recording format to 4P. If any other value is set, the recorded time
code will mis-match. (Only when SYSTEM FREQ is set to 59.9 Hz)
•
UB PRESET
(Camera) Sets the user information.
YES NO
indicates the factory setting.