RGB Spectrum SuperView 3000 用户手册

S E R I A L C O M M A N D S E T

Serial Command Set Usage

SuperView 3000 User Manual

May 9, 2002

TABLE 4.

D e f i n i t i o n s a n d Ra n g e s f o r I n p u t Ti m i n g P a r a m e t e r s

SAVECONFIGuration

(none)

Forces an update and explicit save of the system’s
NVRAM. This stores configuration information such as
HostList, InputList, Host settings and display
parameters.

STATus

(none)

Returns the Status of the SuperView and its current
settings.

TestPattern

This command turns the designated TestPattern (moving
bars, grayscale, or color bars) on. Use the Off argument
to turn the TestPattern off.

Factory default: OFF

UpdateFirmWare

(none)

This command updates the firmware for the SuperView.

If the baud rate is other than 115,200, the user will be
prompted to change the baud rate of the terminal
emulator and the SuperView to 115,200.

When this is complete, the Updatefirmware command
must be re-issued and confirmed. The user is prompted
to download the file.

On the screen, progress dots appear during the
download.

See Appendix C for more information on the update
procedure.

VERSION

(none)

Version returns firmware, hardware, and bootcode
revision information.

Command

Arguments

Description

Parameter

Definition

Range

HFP

Horizontal front porch

0 to 640 pixels

Horizontal sync

16 to 640 pixels

HBP

Horizontal back porch

0 to 640 pixels

HACT

Horizontal active

16 to 1600 pixels

VFP

Vertical front porch

0 to 512 lines

Vertical sync

2 to 32 lines

VBP

Vertical back porch

0 to 512 lines

VACT

Vertical active

12 to 1200 lines

HFREQ

Horizontal frequency in Hz

15 to 90 kHz

SYNC

Sync format

3, 4, or 5 wires

HPOL

Horizontal sync polarity

1 or 0

VPOL

Vertical sync polarity

1 or 0

Interlaced/Noninterlaced

1 or 0