Sharp VL-NZ10S 用户手册

CARD-CAMERA

Before using a commercially available card
with this camcorder, you must first have it
formatted. Also, if any of the following warning
indicators displays, you will need to format your
card.

• “FORMAT MEMORY CARD”
• “MEMORY CARD ERROR”
• “MEMORY CARD READ ERROR”
• “CANNOT STORE DATA”

Cautions:
• Formatting a card erases all stored images,

including delete-protected images. Be sure to
backup important data on your computer or
other media before formatting the card (see
pages 65, 66 and 79).

• Do not remove the power source during

formatting, as this may cause damage to the
camcorder or card. It is recommended that you
use the AC outlet for the power supply.

Insert a card to be formatted into the
camcorder.

In CARD-CAMERA mode, press the
MENU button until the menu screen
appears.

Press l or m on the operation button
to select I, then press the SET button.

Press l or m to select “FORMAT”, then
press the SET button.

• To cancel formatting, press l or m to

select “NO”, then press the SET button.

Press l or m to select “YES”, then
press the SET button to begin format-
ting.

• The menu screen displays when

formatting finishes.

Press the MENU button to turn off the
menu screen.

Notes:
• The card supplied with VL-NZ10 is preformatted

for immediate use.

• Use this camcorder to format a card. The

camcorder may not recognize the images on a
card formatted by a computer or other equip-
ment.