Sony DSR250P 用户手册

下载
页码 192
63
Advanced Recording Operations
Recording a still image on a tape – Tape Photo recording
To do tape photo recording using the Remote Commander
Press PHOTO on the Remote Commander. Your camcorder immediately records an
image on the LCD screen or in the viewfinder.
When you do tape photo recording during normal CAMERA recording
You cannot check an image on the LCD screen or in the viewfinder by pressing PHOTO
lightly. Press PHOTO deeper. The still image is then recorded for about seven seconds
and your camcorder returns to standby mode.
When shooting a moving object in Tape Photo recording
When playing back the image by another unit, the image may be blurred. This is not a
malfunction.
Printing the still image
You can print a still image by using a video printer (not supplied). Connect with the
video printer using the A/V connecting cable.
Connect the yellow plugs of the cable to the video input of the video printer and the
VIDEO IN/OUT jack on your camcorder. Refer to the operating instructions of the
video printer as well.
If the video printer is equipped with an S video input
Use an S video connecting cable (not supplied). Connect it to the S VIDEO jack on your
camcorder and the S video input of the video printer.
S VIDEO
VIDEO IN/OUT
LINE IN
VIDEO
S VIDEO
Video printer
: Signal flow
(not supplied)
(not supplied)