Sony DSR250P 用户手册

(1) In standby or recording mode, press DIGITAL EFFECT. The digital effect

indicator appears.

(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.

The digital effect indicator changes as follows:
STILL 

y FLASH y LUMI. y TRAIL y OLD MOVIE

(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bar appears.

In STILL and LUMI. modes, the still image is stored in memory.

(4) Turn the SEL/PUSH EXEC dial to adjust the effect.

STILL

The rate of the still image you want to superimpose on the
moving picture

FLASH

The interval of flash motion

LUMI.

The colour scheme of the area in the still image which is to be
swapped with a moving picture

TRAIL

The time until the incidental image vanishes

OLD MOVIE

No adjustment necessary

The longer the bar on the screen, the stronger the digital effect. The bar appears in the
following modes: STILL, FLASH, LUMI. and TRAIL.

Press DIGITAL EFFECT. The digital effect indicator disappears.

Notes
•The following functions do not work in digital effect mode:

– Fader
– Tape Photo recording
– Shutter speed (1/25 or smaller) adjustment

•The following functions do not work in old movie mode:

– Wide mode
– Spot light mode

When you manually adjust the shutter speed
OLD MOVIE will be automatically cancelled.

When you turn the power off
Digital effect will be automatically cancelled.

LUMI.

LUMI.