Sony DCR-HC85 用户手册

下载
页码 152
Dubbing/Editing
106
using the A/V connecting cable. However, the sound 
you have recorded afterwards is not output from the 
speaker. Check the sound by using the headphones 
or a TV.
Recording sound 
1
Insert a recorded cassette into your 
camcorder.
2
Slide the POWER switch repeatedly to 
select the PLAY/EDIT mode.
3
Touch 
 (play/pause) to play the 
tape.
4
Touch 
 (play/pause) again at the 
point where you want to start 
recording the sound.
The playback pauses.
5
Touch .
6
Touch [MENU].
7
Touch 
/
 to select 
 (EDIT/
PLAY), then touch 
.
8
Touch 
/
 to select [AUD DUB 
CTRL], then touch 
.
9
Touch [AUDIO DUB].
A green 
X mark appears on the LCD 
screen.
10
Touch 
 (play) and start playing 
back the audio you want to record at 
the same time.
A red 
 mark remains on the LCD screen 
while recording sound.
The new sound is recorded in stereo 2 (ST2) 
during the playback of the tape.
11
Touch 
 (stop) when you want to 
stop recording.
To dub on other scenes, repeat steps 3 and 4 
to select scenes, then touch [AUDIO DUB].
12
Touch , 
then .
To set the end point for audio dubbing
During playback, press ZERO SET MEMORY 
on the Remote Commander at the scene at 
which you want to stop audio dubbing. Then, 
perform steps 4 to 10. The recording stops 
automatically at the selected scene.
b
Note
• You can only record additional audio over a tape 
recorded on your camcorder. The sound may 
deteriorate when you dub audio on a tape recorded 
on other camcorders (including other DCR-HC65/
HC85 camcorders).
0:00:00:00
AUD  DUB  CTRL
AUDIO
DUB
0:00:00:00
AUD  DUB  CTRL
AUDIO
DUB