Sony DCR-PC100 手册

Note
If one day’s recording is less than two minutes, your camcorder may not accurately find
the point where the recording date changes.

•The bar in the 

 mark indicates the present point on the tape.

•The   mark in the 

 indicates the actual point you are trying to search.

If a tape has a blank portion between recorded portions
The date search function may not work correctly.

Cassette memory
The tape cassette memory can hold six recording date data. If you search the date
among seven or more data, see “Searching for the date without using cassette memory”
below.

Searching for the date without using cassette memory

(1) Set the POWER switch to VTR.
(2) Set CM SEARCH in 

 to OFF in the menu settings (p. 76). If using a tape

without cassette memory, skip this step.

(3) Press SEARCH MODE on the Remote Commander repeatedly, until the date

search indicator appears.
The indicator changes as follows:
DATE SEARCH 

t PHOTO SEARCH t PHOTO SCAN t no indicator

(4) Press . on the Remote Commander to search for the previous date or press

>

 on the Remote Commander to search for the next date. Your camcorder

automatically starts playback at the point where the date changes. Each time
you press . or >, your camcorder searches for the previous or next date.

To stop searching

Press x.

Searching a recording by date – Date search