Sony 510P 用户手册
Cha
pt
er 2
Loc
a
tio
ns
a
a
nd F
unc
tions
of
P
of
P
ar
ts
ts
a
nd Cont
rol
s
s
35
2-7 Time Code System
Time code functions (2)
d DISPLAY switch
This cycles the data displayed in the counter display
through the sequence COUNTER, TC, and U-BIT.
COUNTER: Display the elapsed recording/playback time
This cycles the data displayed in the counter display
through the sequence COUNTER, TC, and U-BIT.
COUNTER: Display the elapsed recording/playback time
(hours, minutes, seconds, frames).
TC: Display time code.
U-BIT: Display user bit data.
U-BIT: Display user bit data.
For details, see “Time code display” on page 40.
e RESET button
Pressing this button resets the time data displayed on the
counter display section to “00:00:00:00” or the user bit
data to “00000000.”
Pressing this button resets the time data displayed on the
counter display section to “00:00:00:00” or the user bit
data to “00000000.”
f HOLD (display hold) button
Pressing this button instantly freezes the time data
displayed in the counter display section. (The time code
generator continues running.) Pressing this button again
releases the hold. You can use this button, for example, to
determine the exact time of a particular shot.
When the HOLD button is activated, the time data is
displayed in the following format:
Pressing this button instantly freezes the time data
displayed in the counter display section. (The time code
generator continues running.) Pressing this button again
releases the hold. You can use this button, for example, to
determine the exact time of a particular shot.
When the HOLD button is activated, the time data is
displayed in the following format:
For details of the counter display, see 2-9 “Warnings and
Indications on the LCDs” on page 38.
Indications on the LCDs” on page 38.
g SEL/SET (select/set) dial
To set a time code, user bit, or real time value, press this
dial so that the digit you want to change flashes.
To set a time code, user bit, or real time value, press this
dial so that the digit you want to change flashes.
Turning the dial upward increases the value of the flashing
digit, and turning it downward decreases the value.
digit, and turning it downward decreases the value.
h PRESET/REGEN (regeneration)/CLOCK switch
This switch selects whether to set a new time code or to
follow the already recorded time code.
PRESET: Records time code with a preset initial value.
REGEN: Records time code continuous with the existing
This switch selects whether to set a new time code or to
follow the already recorded time code.
PRESET: Records time code with a preset initial value.
REGEN: Records time code continuous with the existing
time code recorded on the disc. Regardless of the
setting of the F-RUN/SET/R-RUN switch, the
camcorder operates in R-RUN mode.
setting of the F-RUN/SET/R-RUN switch, the
camcorder operates in R-RUN mode.
CLOCK: Records time code synchronized to the internal
clock. Regardless of the setting of the F-RUN/SET/R-
RUN switch, the camcorder operates in F-RUN mode.
RUN switch, the camcorder operates in F-RUN mode.
i F-RUN/SET/R-RUN (free run/set/recording run)
switch
This switch selects the operating mode for the internal time
code generator.
F-RUN: Time code keeps advancing, regardless of the
code generator.
F-RUN: Time code keeps advancing, regardless of the
operating state of the VDR. Use this setting when
aligning the time code with real time or when
synchronizing the time code with an external time
code.
aligning the time code with real time or when
synchronizing the time code with an external time
code.
SET: Set the switch to this position to set the time code or
user bits.
R-RUN: The time code value advances only during
recording. Use this setting to have a consecutive time
code on the disc.
code on the disc.
For details, see 5-6-3 “Setting the User Bits” on page 89
and 5-6-1 “Setting the Time Code” on page 89.
and 5-6-1 “Setting the Time Code” on page 89.
SEL/SET
THUMBNAIL
S.SEL
ESSENCE MARK
SUB CLIP
REGEN
CLOCK
CLOCK
F-RUN
SET
R-RUN
PRESET
SHIFT
CLIP MENU
6
HOLD button
5
RESET button
4
DISPLAY switch
7
SEL/SET dial
8
PRESET/REGEN/CLOCK switch
9
F-RUN/SET/R-RUN switch