Sony CCD-TRV10 操作指南
54
Symptom
Cause and/or Corrective Actions
• Reset the date and time. (p. 42)
• START/STOP MODE switch is set to
or 5 SEC.
m Set it to
. (p. 33)
Picture
Symptom
Cause and/or Corrective Actions
• The viewfinder lens is not adjusted.
m Adjust the viewfinder lens. (p. 13)
• The contrast between the subject and background is too high.
The camcorder is not malfunctioning.
m Change locations.
m Change locations.
• The video heads may be dirty.
m Clean the heads using the Sony V8-25CLH cleaning cassette.
(p. 48)
• The LCD panel is open.
m Close the LCD panel. (p. 17)
• Incorporated fluorescent tube is worn out.
m Please contact your nearest Sony dealer.
• The camcorder is not malfunctioning.
• The camcorder operates in Demo mode.
m Exit the Demo mode. (p. 68)
Others
Symptom
Cause and/or Corrective Actions
• COMMANDER is set to OFF.
m Set it to ON. (p. 36)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The battery is not inserted with the correct polarity.
m Insert the battery with the correct polarity. (p. 66)
• The batteries are dead.
m Insert new ones. (p. 66)
• Detach the eyecup and clean the viewfinder lens. (p. 49)
The image on the viewfinder
screen is not clear.
screen is not clear.
The date or time indicator
disappears.
disappears.
Recording stops in a few
seconds.
seconds.
A vertical band appears when
a subject such as lights or a
candle flame is shot against a
dark background.
The picture is “noisy”.
a subject such as lights or a
candle flame is shot against a
dark background.
The picture is “noisy”.
The picture does not appear
on the LCD screen.
on the LCD screen.
Trouble check
Symptom
Cause and/or Corrective Actions
• Set the selector to VTR (DC OUT) and disconnect the power
cord. After about one minute, try again. (p.9)
• See the following chart.
The POWER lamp does not
light.
light.
The CHARGE lamp flashes.
AC power adaptor
The picture does not appear
in the viewfinder.
in the viewfinder.
An unknown picture is
displayed.
displayed.
A vertical band appears when
shooting a very bright subject.
shooting a very bright subject.
The supplied Remote
Commander does not work .
Commander does not work .
There is dust in the viewfinder.