Hitachi VM-E520A 用户手册
General Maintenance
- 48 -
BATTERY CONDITION
Symptom
Check Point & Correction
The (
) indication in the electronic
viewfinder flashes to indicate battery is
discharged.
discharged.
§ Try another battery or charge the
battery.
NO OPERATION IS ACCEPTED
Symptom
Check Point & Correction
Power is turned on, but no button
operations are accepted
operations are accepted
§ Remove the power source and the
date/title battery. And, after about
one minute, the display in the
viewfinder will be reset. Then set
the information again.
one minute, the display in the
viewfinder will be reset. Then set
the information again.
The camcorder does not operate when
alkaline batteries are inserted.
alkaline batteries are inserted.
§ Check that the polarities (+, -) of the
batteries are correct. Insert six
batteries.
batteries.
TAPE DISPLAY
Symptom
Check Point & Correction
TAPE appears in the viewfinder
§ Have you moved the camcorder or
cassette from a cold place to a
warm place so that its temperature
changed abruptly?
warm place so that its temperature
changed abruptly?
§ If the temperature has changed,
remove the cassette and set the
CAM/OFF/VIDEO switch to OFF,
then wait for about one hour.
CAM/OFF/VIDEO switch to OFF,
then wait for about one hour.
§ Remove the cassette and then try to
reinsert: remove it several times.
§ If the indication is still shown in the
viewfinder, use a cleaning tape to
clean the heads and replace the
cassette.
clean the heads and replace the
cassette.
Specifications
General Specifications
Power requirements
6V DC
Power consumption
5.4W (when recording)
Dimensions
3-11/16" W x 4-3/4" H x 8-5/16" D (94mm x 120mm x 211mm)
Weight
1.89 lbs (approx. 860g) without battery pack, lens hood, lens
cap
or
cassette
Operating temperature
32°F ~ 104°F (0°C ~ 40°C)
Storage temperature
-4°F ~ 140°F (-20°C ~ 60°C)
Video Recorder Specifications