Hitachi DZ-MV350A 用户手册
92
E
nglis
h
QR34962
Initial Settings
SWITCHING OPERATING SOUND ON OR OFF (BEEP)
This DVD video camera/recorder will emit a sound when the power switch is changed over, the REC
button is pressed to record a movie, or other operations are engaged. If you do not need operating sound,
you can switch it off.
button is pressed to record a movie, or other operations are engaged. If you do not need operating sound,
you can switch it off.
1
Press the MENU button,
choose “Beep” on the
“Initial Setup” menu
screen, and then press the
choose “Beep” on the
“Initial Setup” menu
screen, and then press the
button.
2
Select “On” or “Off”, and then press the
button.
3
Press the MENU button to end the setting.
Note
:
The “Beep” setting will be stored in memory even when the
DVD video camera/recorder is turned off.
DVD video camera/recorder is turned off.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
(POWER SAVE)
This DVD video camera/recorder is equipped with power save function. Specify “Power Save: On”: If the
DVD video camera/recorder is left in the recording pause status without being operated for 5 minutes,
it will automatically turn off to prevent the battery from discharging needlessly.
DVD video camera/recorder is left in the recording pause status without being operated for 5 minutes,
it will automatically turn off to prevent the battery from discharging needlessly.
1
Press the MENU button,
choose “Power Save” on
the “Initial Setup” menu
screen, and then press the
choose “Power Save” on
the “Initial Setup” menu
screen, and then press the
button.
2
Select “On” or “Off”, and
then press the
then press the
button.
3
Press the MENU button to end the setting.
Note
:
•
To turn the DVD video camera/recorder on again from
automatic off activated by the power save function, set
the power switch to “POWER OFF”, and then set it to “
automatic off activated by the power save function, set
the power switch to “POWER OFF”, and then set it to “
VIDEO”, “
PHOTO” or “
PHOTO”
•
The Power Save setting will not appear in the on-screen
information display.
information display.
•
The Power Save setting will be stored in memory even
when the DVD video camera/recorder is turned off.
when the DVD video camera/recorder is turned off.
Setting
Content
On
Beep is heard
Off
No beep is heard
I n i t i a l S e t u p
On
O f f
RAM
Po w e r S a v e
Be e p
ENTER
RETURN
Demo Mode
Re s e t
Re s e t
L a n g u a g e
R e c o r d LED
Setting
Content
On
To engage power save
Off
To cancel power save
I n i t i a l S e t u p
On
O f f
RAM
Po w e r S a v e
Be e p
R e c o r d LED
ENTER
RETURN
Demo Mode
Re s e t
Re s e t
L a n g u a g e