GE CG400 用户手册

Powering Your Camcorder

To Attach Adapter/Charger:

1. Slide the OPEN-BATT button to open

the battery compartment. Carefully
open the compartment fully.

2. Plug one end of the DC power cord

into the DC OUT jack on the adapter/
charger and the other end into the DC
IN 6.5V jack on the side of the
camcorder.

3. Close the battery compartment.

4. Plug the AC adapter/charger power

cord into an AC operating outlet. The
adapter/charger’s POWER indicator
lights.

Tip: The battery level indicator has no
meaning when you power the camcorder with
the adapter/charger.

To Remove the Adapter/Charger:

1. Unplug the adapter/charger from the

wall outlet.

2. Disconnect the DC power cord from

the camcorder and adapter/charger.

Using Optional AC Plug Adapter

An optional plug adapter may be
required in some countries.

1. Plug the adapter/charger’s plug into

the AC plug adapter.

2. Plug the AC plug adapter into the

AC outlet.

Optional AC
Plug Adapter

AC 100-240V

Caution: Do not use this adapter/charger for
any purpose other than charging recommended
battery or supplying power to the camcorder.

Using the Adapter/Charger

The adapter/charger lets you power your camcorder directly from standard household
power. It operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in
the world to power the camcorder or recharge the battery. You may need a plug
adapter in some countries. Consult your dealer.

This section describes three ways to supply power to your camcorder:

■

AC Adapter/Charger

■

Battery

■

Car Cord Adapter (Optional)