Sony BDP-S1100 手册

BDP-S1100/BX110

4-442-380-11(2)

master page=left

C:\Users\fle1\Desktop\SD120021\DATA\4442380112_

US\4442380112\060ADD.fm

, Check the network connection 

(page 14) and the network settings 
(page 24).

, See [Network Update] (page 20) to 

update the player to a newer software 
version.

, Check that [Control for HDMI] in 

[HDMI Settings] is set to [On] 
(page 23).

, If you change the HDMI connection, 

turn the player off and on again.

, If power failure occurs, set [Control 

for HDMI] in [HDMI Settings] to 
[Off], then set [Control for HDMI] in 
[HDMI Settings] to [On] (page 23).

, Check the following and refer to the 

instruction manual supplied with the 
component.
– the connected component is 

compatible with the [Control for 
HDMI] function.

– the connected component’s setting 

for the [Control for HDMI] function 
is correct.

, When you connect the player to a TV 

through an AV amplifier (receiver), 
– if the AV amplifier (receiver) is not 

compatible with the [Control for 
HDMI] function, you may be unable 
to control the TV from the player.

– if you change the HDMI 

connection, disconnect and 
reconnect the AC power cord, or a 
power failure occurs, try the 
following: 

1

Switch the input 

selector of the AV amplifier 
(receiver) so that the picture from 
the player appears on the TV screen. 

2

Set [Control for HDMI] in 

[HDMI Settings] to [Off], then set 
[Control for HDMI] in [HDMI 
Settings] to [On] (page 23). Refer to 
the instruction manual supplied 
with the AV amplifier (receiver).

, Check that [Control for HDMI] and 

[Linked to TV-off] in [HDMI Settings] 
are set to [On] (page 23).

, Press OPTIONS, and select [Play from 

beginning].

, The resume point may be cleared from 

memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.