OPPO Digital BDP-80 用户手册

Incorrect color space setting 

If using HDMI for video output, check the color space 
setting on the TV and player. 

Incorrect color 

Incorrect component video 
cable connection 

If using component video output, check the three 
component video cables to make sure the signals 
match on both ends 

Video output resolution is not 
support by the TV 

Select a proper output resolution that is supported by 
your TV. 

Picture rolling or 
split picture 

Video system is not supported 
by the TV 

When playback is completely stopped, press and hold 
the P/N button or set the correct TV System in the 
Setup Menu. 

29, 47 

No disc or incompatible disc 
loaded in player 

Eject disc and check. 

Dirty disc recording surface 

Eject the disc and clean any dirt or fingerprints. 

Disc not properly loaded 

Eject disc and make sure the label side is facing up 
and the record side is facing down. 

“No Disc” or 
“Unknown Disc” 
error 

Condensation on the Laser 
pick-up head 

Turn on the player, eject the disc and leave the player 
on for about an hour. 

Remote control is out of range 

Use the remote control within the effective range. 

Low battery 

Replace the batteries. 

Remote control 
failure 

Incorrect remote control code 

Open the disc tray. Aim the remote at the player. Press 
and hold the ENTER button on the remote for 5 
seconds to set the remote code. 

Scratched or damaged disc is 
used 

Replace the disc. 

Some functions are not 
available during playback 

Stop playback completely, then try again. 

Temporary 
function failure 

Interference from other devices 

Identify interference by turning off other devices, and 
then relocate or replace the offending device 

Some Setup 
Menu items are 
grayed out 

Some setup options cannot be 
changed while a disc is playing.  
Some setup options may be 
mutually exclusive with other 
setup options. 

Fully stop playback, eject the disc and try the Setup 
Menu again.