Huffy M0073 用户手册

21

 CAUTION: The right pedal is marked “R” and the left pedal is marked “L”.

•  The pedal marked “R” has right-hand threads.  Tighten it in a clockwise direction.
•  The pedal marked “L” has left-hand threads.  Tighten it in a counterclockwise 

direction (anti-clockwise).

•  Turn the right pedal marked “R” into the right side of the crank arm, and the left 

pedal marked “L” into the left side of the crank arm.

•  Make sure the threads of each pedal are fully into the crank arm.

NOTE: The recommended torque (tightness) for each pedal is 30 ft.-lbs.

fig 14

R

L

Note: A Pedal Wrench is preferred for attaching Pedals.  An open-end

wrench can also be used as shown.

 WARNING: Ensure pedals 

are secure in crank arms so they will 
not loosen.  Periodically check tight-
ness.