Panasonic KX-TG1855AL 用户手册
Base Unit Settings
21
Base unit settings
To customise the base unit using the handset:
1
{j
/OK}
2
Press {^} or {V} to select “Base Unit Setup”. i {>}
3
Press {^} or {V} to select the desired item in the base unit settings menu. i
{>}
{>}
4
Press {^} or {V} to select the desired item in the sub-menu. i {>}
5
Press {^} or {V} to select the desired setting then press {>}.
L
L
This step may vary depending on the feature being programmed.
L
To exit the operation, press {ih}.
Note:
L
L
The current item or setting is indicated by > on the display.
*1 Change the recall time, if necessary, depending on the requirements of your
service provider/telephone company or PBX.
The recall time depends on your telephone exchange or host PBX. Consult your
PBX supplier if necessary.
You can access your service provider/telephone company “Call Waiting” service
by having the recall time set at 100 ms, and then follow your service
provider/telephone company “Call Waiting” instructions to operate this service.
The recall time depends on your telephone exchange or host PBX. Consult your
PBX supplier if necessary.
You can access your service provider/telephone company “Call Waiting” service
by having the recall time set at 100 ms, and then follow your service
provider/telephone company “Call Waiting” instructions to operate this service.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal
the PIN to you.
*3 If you forget your PIN, consult your nearest Panasonic service centre.
Menu
Sub-menu
Details (default setting)
Ringer Volume
—
For base unit (Medium)
Call Options
Recall/Flash
Recall time (“100 msec.”)
Area Code
Other Options
Base Unit PIN
Change base unit PIN (“0000”).
– Enter the current 4-digit base unit
PIN.
– Enter the new 4-digit base unit
PIN. i {>} i {ih}
Repeater Mode
(“Off”): page 32
TG1855-1857AL(e-e).book Page 21 Thursday, July 12, 2007 5:31 PM