Uniden Answering Machine 用户手册

www.uniden.com

• Place the power cord

so that it does not
create a trip hazard
or where it could
become chafed and
create a fire or
electrical hazard.

• Use only the supplied

• Connect the AC adapter to a continuous power supply.
• Place the base unit and charging cradle close to the AC

outlets so that you can unplug the AC adapters easily.

1) Connect each AC adapter to the DC IN 9V jack 

and to each standard 120V AC wall outlet.

2) Set the base and charging cradle on a desk or

tabletop, and place one handset in the base unit
and one in the charging cradle.

3) Raise the base antenna to a vertical position.

4) Make sure that the charge/in use and charge LED

illuminate. If the LED does not illuminate, check
to see that the AC adapter is plugged in and that the handset makes good contact
with the cradle’s charging contacts.

After installing the battery packs in the handsets, charge your handsets at least 

hours before plugging into the phone line.

5) Once the handset battery packs are fully charged,

connect the telephone line cord to the TEL LINE
jack and to a telephone outlet.

Modular

If your telephone outlet isn't modular,
contact your telephone company 
for assistance.

Place the handset in
the base or charging
cradle with the 
keypad facing 
forward for charging.