Nortel Networks CalPilot 4.0 用户手册

July 2006

Installing the 201i server in a large Meridian 1 system

201i Server Hardware Installation

57

1 Remove the I/O panel cover from the rear of the Meridian 1 switch.

2 Remove the protective plate from the rear of the Meridian 1 switch. 

3 Remove the existing backplane cable, including the I/O filter assembly 

(NT8D81xx) and mounting hardware for the left slot as follows:

a. Remove the external cable attached to the outside of the I/O panel. 

b. For each of the UP 1, UP 2, and UP 3 cable connectors, push the lock 

tab outwards to unlock the cable connection, and then pull the 
connector off.

G101547