Auerswald 2500 用户手册
Make a Call
In the Call
63
Your systems telephone will display the functions which are selectable during a conversation
in the bottom line. With help of the and softkeys you are able to scroll through the dif-
ferent options. With the
in the bottom line. With help of the and softkeys you are able to scroll through the dif-
ferent options. With the
softkey you will start the displayed function immediately.
On the COMfortel 1500 you can view the time information (date, time, calendar week, day of
the week) by pressing the
the week) by pressing the
softkey followed by scrolling with the and
softkeys.
During an existing connection you can send DTMF signals with the keypad (tones according
to the dual-tone multi-frequency standard), e.g. to control an answering machine. The dialled
digits are presented in the display. If there is a bigger quantity of DTMF signals that you often
need, you can configure a function key as a Macro (see
to the dual-tone multi-frequency standard), e.g. to control an answering machine. The dialled
digits are presented in the display. If there is a bigger quantity of DTMF signals that you often
need, you can configure a function key as a Macro (see
).
If you like to call your current call partner later again, you can be reminded by your telephone
at a defined date later (see also
at a defined date later (see also
).
During a current call your attention is drawn to a call (external or internal subscriber, alarm
or visitor at the door) by a knocking signal (tone and/or flashing hook LED; see
or visitor at the door) by a knocking signal (tone and/or flashing hook LED; see
You can accept the waiting call (
) or switch off the knocking tone
temporarily (
With the function Pickup you can also take-over calls to your own telephone during a call to
other telephones (see
other telephones (see
View Information on a Call
During a call you get information on the call and the call partner as well as general time infor-
mation (date, time, calendar week, day of the week) on the display. As it is not possible to
view all information at the same time, you can view them as described in the following.
mation (date, time, calendar week, day of the week) on the display. As it is not possible to
view all information at the same time, you can view them as described in the following.
The provider used for the call, is only shown if LCR easy is used (see manual of the PBX).
The call charges are only shown if the charge transfer has been activated by the network pro-
vider.
vider.
☞
Advice
You are in a call.
Press the
softkey to get information about
the call.
All available information on the
call are presented (see
call are presented (see
).
Use the and softkeys to browse through
the information.
the information.
Press the
softkey to leave the menu.
☞
Advice