Motorola B801 用户手册

42

Registration

take about 10 seconds to complete the registration. The 
handset will display 

, with 

denotes the handset number (1-6). There will be a beep 
sound if the registration is successful.

NOTES
1. If the registration is not successful, the display will show 

. To reset the handset, remove the 

handset from the telephone base and place it back in. 
Try the registration process again.

2. You cannot register a handset if any other system 

handset is in use.

You may need to de-register your handsets if:
You have five registered handsets and need to replace a unit. 
OR
You wish to change the designated handset number of your 
registered handsets.
You must first de-register ALL the handsets, and then re-
register each handset you wish to use.

Please read carefully through all the instructions on this 
page before beginning the de-registration process.
1. Press and hold 

a

 on the telephone base for about 10 

seconds (until the IN USE light turns on and starts to 
flash quickly), then release the 

a

 button.

2. Immediately press and release 

a

 again. You must 

press 

a

 while the IN USE light is still flashing. (The 

light flashes for about seven seconds. If the light stops 
flashing, pick up the handset and place it back into the 
telephone base, then start again with step one above.)

3. The handset(s) will show 

 and it will 

take about 10 seconds to complete the de-registration 
process. ALL handsets will show 

 if de-

registration was successful.

4. To re-register the handset(s) to the telephone base, 

follow the registration instructions as section above.

NOTES
1. If the de-registration process was not successful, you 

may need to reset the system and try again. To reset: 
pick up the handset and press the 

<

 button, then press