GE Concord 4 用户手册

For Latchkey Opening Reports, the page reports the arming level as 111 (1—OFF) and the user.
For Latchkey Closing Reports, the page reports the arming level as 222 (2—STAY) or 333 (3—

AWAY), and the user that armed to that level. See “Notification By Pager”.

The installer can set up Latchkey Opening for one of two types of use: Basic and Advanced.

If your system is set up for Basic Latchkey, there are two ways to send a Latchkey Opening page:

1. Assign the Latchkey Opening feature a time schedule. (This needs to be done only once.)
2. Arm the system.
3. Disarming of the system by a Latchkey-designated user within the assigned time schedule, 

sends an Opening page.

6

1. Arm the system, then press

 

6

, or press the Lock button on a keychain touchpad after arming 

to 3—AWAY.

2. Disarming of the system by a Latchkey-designated user sends an Opening page, regardless of 

assigned time schedule:

If your system is set up for Advanced Latchkey use, there is one way to send a Latchkey Opening 

page:
1. Assign the Latchkey Opening feature a time schedule. (This needs to be done only once.)
2. Arm the system, then press 

6

, or press the Lock button on a keychain touchpad after arming 

to 3—AWAY.

3. Disarming of the system by a Latchkey-designated user within the assigned time schedule, 

sends an Opening page:

In Advanced Latchkey use, paging is available only during the time schedule(s) that you assign 

to it.

Latchkey Closing can be used alone, or in addition to Latchkey Opening.
1. Assign the Latchkey Closing feature a time schedule.
2. The system is disarmed.
3. Arming of the system by a Latchkey-designated user within the assigned time, schedule 

sends a Closing page:

A Touchtone phone can be used to set up Latchkey paging, but touchpads work much better 

because of their extensive feedback. See “Appendix C” for touchpad and phone programming 

instructions.

Follow these steps to attach a time schedule to Latchkey Opening and/or Latchkey Closing. If 

you need assistance setting up a time schedule that fits your needs, see “Creating Time Sched-

ules”.

1. At an alphanumeric or fixed display touchpad, enter the programming menus by pressing 

9

 + System or Partition Master 

CODE

.

2. Press 

0600

 + 

#

.